Brother QL-580N Manuale d'uso del software - Pagina 26

Sfoglia online o scarica il pdf Manuale d'uso del software per Etichettatrice Brother QL-580N. Brother QL-580N 48. Label printer
Anche per Brother QL-580N: Manuale d'uso della rete (42 pagine), Manuale d'uso del software (40 pagine), Manuale d'uso della rete (48 pagine), Manuale d'uso (26 pagine), Manuale d'uso (40 pagine), Manuale di configurazione e funzionamento (43 pagine), Manuale d'uso (41 pagine), Manuale di configurazione e funzionamento (43 pagine)

Transferring templates to the printer via the network

(QL-580N / 1060N / 720NW only)

To transfer the templates to the printer via the network, you need to use BRAdmin Professional. BRAdmin

Professional can be downloaded from our website at http://solutions.brother.com.

The printer names and pictures in the following screens may differ from your purchased printer. The screens

may vary depending on the model.

Create the template you want to transfer with P-touch Editor 5.0, then choose [File]-

[Transfer Template...] menu to register.

Click

to save the registered template in .blf format.

Start BRAdmin Professional.

Choose the printer and [Load Firmware] from the [Control]

menu.

If multiple printers are connected, you can find the

desired printer from its IP address.

The IP address can be checked by printing the printer

set-up information.

Press and hold down the Cut button when the power is

on to print the printer set-up information.

Choose Load Firmware function of the BRAdmin

Professional.

Choose [TFTP PUT] and click the [OK] button.

Choose the file in .blf format which you saved in step 2

and load it to the printer.

Choose the .blf file and click the [OK] button.

The default password is "access".

Transferring templates to the printer via the network (QL-580N /

1060N / 720NW only)