Brother QL-600 Manuale di configurazione rapida - Pagina 6
Sfoglia online o scarica il pdf Manuale di configurazione rapida per Etichettatrice Brother QL-600. Brother QL-600 9.
Stampa la pagina
5. Turn Power On/Off
On: Press the Power ( ) Button to turn the Label Printer On. The Status LED turns green.
IMPORTANT
IMPORTANT
• If you are using a DK Die cut label, the end of the label is aligned automatically after you press the Power ( ) Button.
• If a different label is set, press the Feed Button to align the end of the label.
Off: Press and hold the Power ( ) Button to turn the Label Printer Off.
6. LED Indications
The indicators light and flash to indicate the Label Printer's status.
Status LED
Not lit
Steady green light
Flashing green light
Steady orange light
Flashing orange light
Steady red light
Flashing red light
* Rapidly = three times per second.
NOTE
See the Troubleshooting section in this guide for tips on how to fix errors.
Condition
Power is Off
The Label Printer is in one of the following modes:
• Idle mode
• Feeding mode
• Printing mode
• Cutting mode
The Label Printer is doing one of the following:
• Receiving data
• Canceling the print job
One of the following is occurring:
• The DK Roll Compartment Cover is open. Close the DK Roll Compartment Cover correctly.
• The Label Printer is in Reset mode.
• If the Status LED lights in orange for 0.5 second after printing, the Label Printer is erasing all
print data.
For more information, see the User's Guide.
• The Label Printer is in Cooling mode.
• Label Printer settings are being reset.
For more information on resetting the Label Printer, see the User's Guide.
• The Label Printer is in Boot mode. If the Label Printer remains in Boot mode, contact Brother
Customer Service.
• The Label Printer's firmware may need to be updated. For more information on updating the
firmware, see the User's Guide.
If the red light flashes at one second intervals, one of the following errors has occurred:
• Roll end error
• No media error
• Wrong media error
• Feed error
• Cover open error
• Transferred data error
If the red light is off for one second, flashes twice rapidly*, and turns off again, then a cutter error
has occurred.
If the red light flashes rapidly*, there is a system error.
Contact Brother Customer Service.