Fujitsu S6240 Manuale Bios - Pagina 11

Sfoglia online o scarica il pdf Manuale Bios per Computer portatile Fujitsu S6240. Fujitsu S6240 29. Lifebook s series

Stampa la pagina

Serial/Parallel Port Configuration Submenu of the Advanced Menu

The Serial/Parallel Port Configuration submenu

provides the ability to set the I/O addresses and

interrupt levels for the serial, infrared, and parallel

ports of your notebook.

Use of the parallel and serial ports with

■

this system is possible only with the

optional port replicator.

To prevent IRQ and address conflicts,

■

avoid changing the default settings. If

you must change the settings, you can

call 1-800-8Fujitsu for technical assis-

tance.

■

The BIOS will warn you of resource con-

flicts by placing a yellow asterisk next to

each device that is in conflict.

All I/O addresses in Table 5 are in hexa-

■

decimal.

Serial/Parallel Port Configurations

Serial Port:

I/O Address:

Interrupt:

Infrared Port:

Mode:

I/O Address:

Interrupt:

I/O Address:

DMA Channel:

Parallel Port:

Mode:

I/O Address:

Interrupt:

Help

ESC

Exit

PhoenixBIOS Setup Utility

Advanced

[Enabled]

[3F8-3FF]

[IRQ 4]

[Enabled]

[FIR]

[2E8 - 2EF]

[IRQ 3]

[400-43F]

[DMA 3]

[Enabled]

[Bi-directional]

[378-37F]

[IRQ 7]

Select Item

-/Space

Select Menu

Enter

Figure 5. Serial/Parallel Port Configuration Submenu

A d v a n c e d M e n u

I/O addresses, DMA channels, and

Interrupt levels can be entered in various

ways, including via the BIOS setup utility,

the control software for the I/O device, or

the hardware. If any two ports or devices,

serial or parallel, have the same I/O

address assigned your notebook will not

function normally. Please keep a record of

original settings before making any

changes in the event that a restoration is

required. See your hardware and software

documentation as well as the setup utility

to determine settings, limitations, etc.

Item Specific Help

[Disabled]

The port is disabled.

[Enabled]

The port is enabled

with user configuration.

[Auto]

Plug & Play OS

configure the port.

Change Values

Select

Sub-Menu

F10

Setup Defaults

Save and Exit