Brother FAX-2840 Manuale di configurazione rapida - Pagina 8
Sfoglia online o scarica il pdf Manuale di configurazione rapida per Macchina fax Brother FAX-2840. Brother FAX-2840 16. Quick setup guide
Anche per Brother FAX-2840: Manuale di configurazione rapida (16 pagine), Come sostituire l'unità tamburo (15 pagine)
Stampa la pagina
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Before you connect the external telephone
answering machine, remove the protective cap c
from the EXT. socket on the machine.
1
2
3
a Extension telephone answering machine (not
allowed)
b External telephone answering machine
c Protective cap
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 9. For
additional details, see Connecting an
external TAD in the Basic User's Guide.
8
(Example
for Australia)
7
Set your country
This procedure may not be available, depending on
the model of your machine.
In this case, proceed to the next step.
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
Check that the power is turned on by plugging
in the power cord and turn the power switch on.
Press OK.
Set Country
Press OK Key
b
Press a or b to select your country (Australia,
New Zealand, South Africa, Turkey or others).
Australia
Select a b or OK
c
Press OK when the LCD shows your country.
d
The LCD prompts you to make sure of the
country again.
Australia?
1.Yes 2.No
e
Do one of the following:
If the LCD shows the correct country, press
1 to go to Step f.
Press 2 to go back to Step b to select the
country again.
f
After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.