Fujitsu PRIMERGY B900 Manuale di riferimento - Pagina 28
Sfoglia online o scarica il pdf Manuale di riferimento per Server Fujitsu PRIMERGY B900. Fujitsu PRIMERGY B900 36. Blade server systems, contents of the mmb s1 help system
Stampa la pagina
Settings
The following information may be needed for CSR generation:
Key size: Selects the key size for the key.
•
Country: Selects the country.
•
State/Province: The state of your locality.
•
Location: The locality where your organization is located or registered.
•
Organization: The official name of the organization.
•
Organization Unit: Needed if different divisions of the organization have
•
different certificates.
Common Name: The common name is typically composed of the host + domain
•
names. If the certificate is to be used on an intranet (or internal network), the
common name can consist of one word, and it can also be the name of the
server.
Email Address: The contact email address.
•
Action on CSR and Private Key
Download CSR: Downloads the CSR file from the MMB.
•
Download private key: Downloads the private key from the MMB.
•
User Certificate
User name: The user name for which the MMB will issue the certificate.
•
Password for User Certificate: Enter the password for the user certificate.
•
Confirm Password: Enter the password for the user certificate again for
•
confirmation.
Start Certificate Generation: Generates the user certificate.
•
Download Certificate: Downloads the generated user certificate. If the user
•
certificate is not generated yet, error messages will be displayed asking the user
to generate the user certificate first.
Settings
System Unit
Network Interface
Service LAN
Port Configuration
•
Enable IP Protocol Versions
o
28
IPv4: Enables IPv4 addresses only for the MMBs service port.
IPv4 and IPv6: Enables IPv4 and IPv6 addresses for the MMBs
service port.
Duplex Execution Mode: Displays the current duplex execution
mode of the NIC of the MMB's service port.
Duplex Setting Mode: Sets the duplex mode of the NIC of the
MMB's service port.