Fujitsu PRIMERGY CX122 S1 Manuale operativo - Pagina 45

Sfoglia online o scarica il pdf Manuale operativo per Server Fujitsu PRIMERGY CX122 S1. Fujitsu PRIMERGY CX122 S1 50.

5.3.2

Switching the server off

Ê Shut down the server properly.

The power-on indicator turns off (see item 5 in figure

If the server does not shut down completely, press the On/Off button for

at least four seconds and/or send a corresponding control signal for

power button override.

5.4

5.4.1

Configuring the onboard SATA controller

– If RAID mode is enabled (default setting) you can configure the

onboard SATA controller during boot-up. The default setting is RAID

mode. Compatible and native mode are also released.

For further information refer to "D2899 BIOS Setup Utility for

PRIMERGY CX122 Reference Manual".

– If RAID mode is enabled, the RAID must be configured during boot-

up to use hard disk drives.

For further information, refer to the "Embedded MegaRAID Software

User's Guide" (on the ServerView Suite DVD 2 under Industry

Standard Servers - Expansion Cards - Storage Adapters - LSI RAID / SCSI

Controllers).

The PDF files of the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online

documentation available on the Internet can be found using the URL

(for EMEA market): http://manuals.ts.fujitsu.com. The PRIMERGY

server documentation can be accessed using the Industry standard

servers navigation option.

For the Japanese market please use the URL:

http://primeserver.fujitsu.com/primergy/manual.html.

For RAID management use the tool MegaCLI (available via download).

CX122 S1

Operating Manual

Configuring the server

10 on page

41).