Fujitsu PRIMERGY RX200 S8 Configuratore di sistema e manuale di informazione sugli ordini - Pagina 8
Sfoglia online o scarica il pdf Configuratore di sistema e manuale di informazione sugli ordini per Server Fujitsu PRIMERGY RX200 S8. Fujitsu PRIMERGY RX200 S8 28. System configurator and order-information guide
Stampa la pagina
- 1. Table of Contents
- 2. Memory
- 3. Accessible Drives
- 4. Fibre-Channel Controller
- 5. Communication/Network
- 5. Independent Channel Mode
- 5. Mirrored Channel Mode
- 5. Performance Channel Mode
- 5. Rank Sparing Mode
- 6. System Management Products (Remoteview)
- 7. Miscellaneous
- 8. Country Specific Power Cord
- 9. Change Report
B
Rack version for 19'' racks with
No
PSU included in Base Unit
For an orderable basic unit one CPU = first CPU,
one memory = first memory
one PSU = first PSU as well as
Basic unit with
4x 2,5" HDD + ODD Bay
Basic unit with
8x 2,5" HDD bays, no ODD bay
S26113-F575-E12
450W PSU module platinum
1st or 2nd PSU for redundancy
94% efficiency (platinum)
uses hot plug PSU slot
min. 1 / max. 2x per system
S26113-F574-E99 *
Power Supply Dummy
must be ordered if 1x PSU only
occupies one bay for
hot plug power supply
max. 1x per system
*For order completeness only
Not shown in system architect
Version > V9.2
S26361-F3552-E1
TPM Module
Trusted Platform Module on Motherboard
Use according to import restrictions
max. 1x per system
S26361-F1386-E120
Hot Plug Fan kit (2 double fans)
Fan upgrade kit for CPU
mandatory, if 2nd CPU or
1st CPU (115W or 130W) or
Cool-safe ATD is
configured ex factory
max. 1x per system
C
S26361-K1455-V101
S26361-K1455-V201
S26113-F574-E12
800W PSU module platinum
1st or 2nd PSU for redundancy
94% efficiency (platinum)
uses hot plug PSU slot
min. 1 / max. 2x per system
For later redundancy upgrade the following kit is available:
One 450W power supply module hot plug
no power cable included!!!
One 800W power supply module hot plug
no power cable included!!!
One 800W power supply module titanium
no power cable included!!!
Please order appropriate power cord additionally:
Powercord for rack, 4m, grey, IEC320 C13->C14 connector
Power Cord USA / Canada, 1.8m, grey
For later upgrade to 2nd CPU (bulk delivery) two fans are included in CPU upgrade kit
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX200 S8
Full redundancy cannot be guaranteed for a max.
config. with e.g. two 130W CPUs with 450W PSUs.
In this case SysArch will generate a warning and
PowerSafeguard will throttle CPUs and memory
in case of a PSU failure.
So, power consumption will be limited to 450W.
as soon as available
S26113-E615-E10
800W PSU module titanium
1st or 2nd PSU for redundancy
96% efficiency (titanium)
uses hot plug PSU slot
min. 1 / max. 2x per system
S26113-F575-L12
S26113-F574-L12
S26113-F615-L10
Be aware of import restrictions!
Loose delivery for later
integration possible for customer.
S26361-F3552-L1
TPM Module add-on kit
for later integration (loose delivery)
Trusted Platform Module on Motherboard
Use according to import restrictions
max. 1x per system
Status 30-01-2014
as soon as available
T26139-Y1968-L10
T26139-Y1742-L10
8 of 28