Fujitsu PRIMERGY RX300 S8 Manuale di istruzioni - Pagina 24
Sfoglia online o scarica il pdf Manuale di istruzioni per Server Fujitsu PRIMERGY RX300 S8. Fujitsu PRIMERGY RX300 S8 31. System configurator and order information guide
Anche per Fujitsu PRIMERGY RX300 S8: Scheda tecnica (12 pagine)
Stampa la pagina
N
VIII
Section
Note: This option is possible for:
S26361-F5243-E1
PRAID EP400i
Based on chip LSISAS3108
1GB Cache
RAID 0, 1, 1E, 10, 5, 50, 6, 60
optional FBU, TFM
8 ports 3, 6 & 12Gb/s
SAS/SATA HDD/ SSD
requires 1x FH PCIe 3.0 x8
Low / High profile ex factory
max. 1x per system
S26361-F5243-E100
1x
TFM Module for FBU option
(flash and FBU control logic)
max. 1x per Controller
S26361-F5243-E125
Flash Backup Unit
with 25cm cable set
max. 1x per Controller
S26361-F5243-E660
RAID Advanced Software Options
License Activation Key
for CacheCade 2.0 and FastPath
for 1 Controller
O
Raid Controller and Devices for SAS3.0 (12 Gb/sec)
Modular Raid 5 controller for SAS 12GB/s
RAID levels 0, 1, 10, 5, 50, 6 and 60
are supported.
This RAID controller supports max.
8 HDDs or SSDs
A 12GB/s SAS expander is not available!
S26361-F5243-E2*
PRAID EP420i
Based on chip LSISAS3108
2GB Cache
RAID 0, 1, 1E, 10, 5, 50, 6, 60
optional FBU, TFM
8 ports 3, 6 & 12Gb/s
SAS/SATA HDD/ SSD
requires 1x FH PCIe 3.0 x8
Low / High profile ex factory
max. 1x per system
for EP400i
S26361-F5243-E200
TFM Module for FBU option
(flash and FBU control logic)
max. 1x per Controller
RAID Advanced Software
free of charge test licence
avaliable: PRIMERGY-PM
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX300 S8
The FBU is an option for the controller
which can be used once per controller.
If the FBU option has been choosen, the
TFM Module is needed once per FBU.
Config 10: 4x SAS2.0 + 8x SAS3.0
Config 12: 3.5" drive + 8x SAS3.0
Config 15: LTO + 8x SAS3.0
Controller supports OOB-RAID including OOB-HDD monitoring
no OOB-HDD cable needed
loose delivery: S26361-F5243-L1 / L2
*S26361-F5243-E4/L4**
PRAID EP420i for SafeStore
supports HDD Encryption
available on special release
for EP420i
The FBU is an option
which can be used once per controller.
If the FBU option has been choosen, the
TFM Module is needed once per FBU.
Status 2017-02-28
S26361-F1373-E572
S26361-F1373-E550
S26361-F1373-E560
**SafeStore (SED)
RAID controller require
HDD or SSD devices
with SafeStore (SED)
functionality
Loose delivery TFM option
S26361-F5243-L100 / L200
TFM Module for FBU option
(flash and FBU control logic)
max. 1x per Controller
S26361-F5243-L110
Flash Backup Unit
with 25cm, 55cm, 70cm cable set
max. 1x per Controller
Advanced Software Option
S26361-F5243-L660
RAID Advanced Software Options
License Activation Key
for CacheCade 2.0 and FastPath
for 1 Controller
24 of 31