Fujitsu PRIMERGY TX150 S8 Scheda tecnica - Pagina 4
Sfoglia online o scarica il pdf Scheda tecnica per Server Fujitsu PRIMERGY TX150 S8. Fujitsu PRIMERGY TX150 S8 10. Mono-socket intel xeon processor server
Anche per Fujitsu PRIMERGY TX150 S8: Configuratore di sistema e manuale di informazione sugli ordini (24 pagine)
Stampa la pagina
Data Sheet
FUJITSU Server PRIMERGY TX150 S8 Mono-Socket Intel® Xeon® processor server
Onboard or integrated Controller
RAID controller
SATA Controller
SATA controller type notes
Remote Management Controller
Trusted Platform Module (TPM)
Slots
PCI-Express 3.0 x4 (mech. x8)
PCI-Express 3.0 x16
PCI-Express 2.0 x1 (mech. x16)
PCI-Express 2.0 x4 (mech. x8)
PCI-slots
Slot Notes
Drive bays
Storage drive bays
Accessible drive bays
Notes accessible drives
Drive bays (Base unit specific)
Storage drive bays
Accessible drive bays
General system information
Fan notes
Number of fans
Fan configuration
Fan notes
Operating panel
Operating buttons
Status LEDs
Service display
Page 4 / 10
additional RAID controller options are described under Components RAID controller
Intel® C602, 2 ports used for accessible drives
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
On board SATA controller supports RAID levels 0, 1, 10
Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Infineon / separate module; TCG V1.2 compliant (option)
2 x Full height 280 mm length
1 x Full height 280 mm length
1 x Full height 170 mm length
1 x Full height 230 mm length; preferred RAID slot
1 x PCI 32/33 MHz, 1x long, 5V
in SAS configuration 1x PCI-Express occupied by modular RAID controller.
3.5-inch or 2.5-inch hot-plug SAS/SATA
3 x 5.25/1.6-inch
all possible options described in relevant system configurator
Max 8 (4 + 4) x 3.5-inch
3 x 5.25/1.6-inch for 4 x 3.5-inch HDD/
SSD, or 2 x 3.5-inch HDD/SSD + 1 x
backup drive + local service display
1 x 5.25/0.5-inch for slimline ODD
Redundant fan configuration is only available in combination with redundant PSU
3
4
3+1 redundant
non redundant / non hot-
redundant / non hot-plug
plug
On/off switch
NMI button
Reset button
System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
CPU status
Fan status
Hard disk error
Temperature
CSS (yellow)
Memory status
PSU status (green/ amber)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Optional:
ServerView Local Service Display (LSD)
Max 16 (8 + 8) x 2.5-inch
3 x 5.25/1.6-inch for 8 x 2.5-inch
HDD/SSD + backup drive/ODD, or 8 x
2.5-inch HDD/SSD + slim ODD + local
service display
3
non redundant / non hot-
plug
Max 16 (8+ 8) x 2.5-inch
3 x 5.25/1.6-inch for 8 x 2.5-inch
HDD/SSD + backup drive/ODD, or 8 x
2.5-inch HDD/SSD + slim ODD + local
service display
4
3+1 redundant
redundant / non hot-plug
www.fujitsu.com/fts