Fujitsu SPARC Enterprise M3000 Note sul prodotto - Pagina 20

Sfoglia online o scarica il pdf Note sul prodotto per Server Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 38.
Anche per Fujitsu SPARC Enterprise M3000: Manuale introduttivo (8 pagine), Manuale di sicurezza e conformità (34 pagine), Note sul prodotto (42 pagine)

Notes on the Use of USB Memory

To execute the dumpconfig(8), restoreconfig(8) or snapshot(8) command, if

you specify USB memory as the destination to store data, prepare the USB memory

as a medium in advance.

The data stored will include the information about the system. To use USB memory,

you need to pay attention to the management of the USB memory in which the data

stored, from the data security viewpoint.

We do not provide guarantees to every USB memory from any manufacturers that

currently on the market against its connectivity to XSCF and proper operation.

Depending on the USB memory in use, defects such as the XSCF firmware error or

reset may occur. In case such defects occurred, stop the use of USB memory

immediately.

To connect the USB memory to the USB port for XSCF, connect the USB memory

directly to the USB port. If connected via USB hub or USB extension cables, it may

cause errors.

Please wait at least 30 seconds before turning on the system power that you turned

off, by pulling out the power cable or using the circuit breakers on the distribution

panel.

Power Control and Operator Panel Mode

Switch

You can use the mode switch on the operator panel to switch between system

power-on/off when you use the remote power control utilizing the RCI function or

the automatic power control system (APCS).

For details, see the "Limitations and Cautions" in "Preface" of the SPARC Enterprise

M3000 Server Service Manual.

SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010