Fujitsu SPARC Enterprise M5000 Manuale supplementare - Pagina 33

Sfoglia online o scarica il pdf Manuale supplementare per Server Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 36. Rci build procedure
Anche per Fujitsu SPARC Enterprise M5000: Caratteristiche Manuale (30 pagine), Note sul prodotto (44 pagine), Manuale introduttivo (4 pagine)

Fujitsu SPARC Enterprise M5000 Manuale supplementare
A.1 In the Case Where Setrci Command Ended Abnormally and Displayed "Operation Failed Error Status: XX"
Remedy pattarn
Pattern A
1 Check the RCI setup procedure, the RCI address value and the connection.
1 Check the setting of the RCI address and the duplicate of the RCI address by setrci -c stat command.
2 Check whether the othr RCI host that doesn't execute the RCI initialization is connected.
2 In the case of anomaly, retry RCI setup in correct procedure.
Pattern B
1 Check the RCI address value of current unit by setrci -c stat command.
2 In the case of anomaly, retry RCI setup in correct procedure.
Pattern C
1 Check the RCI address value of current unit and other unit by setrci -c stat command.
2 In the case of anomaly, retry RCI setup in correct procedure.
Pattern D
1 Check whether 95 and more units of RCI I/O unit (include the External power controller) are not connected.
2 When 95 and more units are connected, change the connection configuration to 94 and less units (include the
External power controller), and retry RCI setup.
Pattern E
1 Replace the XSCF board.
2 After the replacement of the XSCF unit, retry RCI setup.
Pattern F
1 Check whether RCI address value of the Line selector switch is not duplicated.
2 If the duplicate, change the RCI address of the Line selector switch, and retry RCI setup. To change the RCI
address of the Line selector switch, refer to its manuals.
Pattern G
Check the state of XSCF, and execute either of the following operations.
When XSCF reboot or redundancy are working, execute the setrci command after these are completed.
If the above-mentioned doesn't correspond, retry the setrci command.
C120-E361-04EN
A-3