Brother MFC 845CW - Color Inkjet - All-in-One Manuale d'uso - Pagina 34
Sfoglia online o scarica il pdf Manuale d'uso per Macchina fax Brother MFC 845CW - Color Inkjet - All-in-One. Brother MFC 845CW - Color Inkjet - All-in-One 43. Brother fax machine user manual
Anche per Brother MFC 845CW - Color Inkjet - All-in-One: Manuale di servizio (5 pagine), Manuale di servizio (17 pagine)
Stampa la pagina
Chapter 4
Difficulties
The cordless handset beeps during
a call.
You cannot make an internal call.
You cannot register the optional
cordless handset.
Error messages
As with any sophisticated office product, errors may occur. If this happens, your cordless handset
identifies the error and shows an error message. The most common error messages are shown
below.
You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers
latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com.
Error Message
Cause
The machine (base unit) is being
Base Unit in
used for intercom calling.
use
The machine (base unit) is being
set up for cordless handset
registration.
The machine (base unit) is being
used for Message Center functions
such as OGM recording or ICM
playing.
You failed to register the cordless
Cannot
handset.
register
Handset
Another person is on the phone line
Line in use
using the machine's (base unit)
speaker phone or another cordless
handset.
The machine (base unit) is
receiving faxes.
The battery of the cordless handset
Low Battery
is low.
Put handset
on cradle
23
Suggestions
Come closer to the machine (base unit). The cordless handset may be too far from
the machine (base unit).
Your battery may be low. If you want to continue the call, transfer the call to the
machine (base unit) and use the Speaker Phone key to answer. (See
Transferring a call at the end of a conversation on page 13.) And then, charge the
battery. (See Charging the battery on page 24.)
The cordless handset or the machine you want to call to may be on an internal call
or an outside call. Wait until the line is free.
Check that both the cordless handset and the machine (base unit) are in standby
mode.
Action
Wait until the line is free.
Wait until the registration is finished.
Wait until machine (base unit) is back in standby
mode.
Try to register the cordless handset again. (See
Registering additional cordless
handsets on page 3.)
Wait until the line is free.
Wait until the line is free.
Charge the battery. (See Charging the
battery on page 24.)
4