Brother MFC-440CN Manuale di configurazione rapida - Pagina 14
Sfoglia online o scarica il pdf Manuale di configurazione rapida per Macchina fax Brother MFC-440CN. Brother MFC-440CN 34. Quick setup guide - english
Anche per Brother MFC-440CN: Manuale di servizio (5 pagine), Manuale di configurazione (23 pagine), Manuale di configurazione rapida (35 pagine), Manuale di servizio (17 pagine)
Stampa la pagina
STEP1
Setting Up the Machine
12
Setting the phone line type
If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
also necessary to change the phone line type
accordingly by completing the following steps.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Phone Line Set.
Press OK.
4
Press a or b to choose PBX, ISDN (or
Normal).
Press OK.
5
Press Stop/Exit.
PBX and TRANSFER
The machine is initially set to Normal, which lets the
machine connect to a standard PSTN (Public
Switched Telephone Network) line. However, many
offices use a central telephone system or Private
Automatic Branch Exchange (PBX). Your machine
can be connected to most types of PABX. The
machine's recall feature supports timed break recall
only (TBR). TBR will work with most PABX systems
allowing you to gain access to an outside line or send
calls to another extension. The feature works when
the Tel/R (MFC-440CN) or R (MFC-660CN) key is
pressed.
Note
You can program a Tel/R (MFC-440CN) or R
(MFC-660CN) key press as part of a number
stored in a Speed-Dial location. When
programming the Speed-Dial number, press Tel/R
or R first (the LCD shows '!'), then enter the
telephone number. If you do this, you do not need
to press Tel/R or R each time before you dial using
a Speed-Dial location.
(See Storing numbers in Chapter 8 of the User's
Guide.)
12
13
Choosing a Receive Mode
(For MFC-440CN)
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Receive Mode.
Press OK.
4
Press a or b to choose the mode.
Press OK.
5
Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User's Guide.