AUTION
Do not install the scanner on
unstable surfaces.
Install the scanner on a desk so that none
of its parts protrude outside of the
desktop. Also, make sure that the scanner
is installed on a flat, level surface. Do not
install the scanner on unstable surfaces.
Install the scanner on a level surface that
is free of vibration to prevent it from falling.
Install the scanner on a strong surface that
will support the weight of the scanner and
other devices.
Do not block the ventilation ports.
Do not block the ventilation ports. Blocking
the ventilation ports generates heat inside
of scanner, which may results in fire or
scanner failure.
Do not place heavy objects or climb
on top of the scanner.
Do not place heavy objects on the scanner
or use the scanner's top surface for
performing other work. Improper
installation might cause injuries.
Firmly insert the power plug.
Firmly insert the power plug into the power
outlet as far it can go.
Avoid any contact when scanner is in
use.
Avoid touching any scanner mechanism
when scanning as this may cause injuries.
Do not use the scanner immediately
after moving it from a cold place into
a warm room.
Do not use the device immediately after
moving it from a cold place into a cold
room. This may cause condensation,
which might lead to scanning errors. Let
the device dry about one or two hours
before you use it.
vi
Before moving the scanner,
disconnect the power plug from the
power outlet.
Do not move the scanner with the power
and interface cables connected as this
might damage the cables, causing fire,
electric shock or injuries. Before moving
the scanner, be sure to disconnect the
power plug from the power outlet, and
disconnect data cables. Also, make sure
that the floor is free of obstructions.
Protect the scanner from static
electricity.
Install the scanner away from strong
magnetic fields and other sources of
electronic noise. Also, protect the scanner
from static electricity as this might cause
the scanner to malfunction.
Do not use aerosol sprays near the
scanner.
Do not use aerosol sprays to clean the
scanner. Aerosol sprays cause dirt and dust
to enter the scanner, resulting scanner
failure and malfunction.
Disconnect the power plug from the
power outlet when the scanner is not
used for a long period of time.
When the scanner is not used for a long
period of time, be sure to disconnect the
power plug from the power outlet for safety.
Do not install the scanner in the
direct sunlight.
Do not install the scanner in the direct
sunlight or near heating apparatus. Doing so
might cause excessive heat to build up
inside the scanner, causing fire or scanner
trouble. Install the scanner in a well-
ventilated location.
Stampa la pagina