Fujitsu FI-4990C Manuale delle procedure di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale delle procedure di installazione per Scanner Fujitsu FI-4990C. Fujitsu FI-4990C 9. Production color document scanner
Anche per Fujitsu FI-4990C: Manuale delle procedure di installazione (7 pagine), Opuscolo (2 pagine), Procedure di installazione (3 pagine), Specifiche tecniche (2 pagine), Istruzioni per la pulizia (2 pagine)

Fujitsu SCSI Scanner Installation Procedures

Use the appropriate cable to connect the scanner to the SCSI controller in your PC and

ensure that all connections are securely fastened. To identify the type of connector for

your model please consult the user manual or refer to the Scanner Hardware Interface

Specifications Web page.

Finally connect the power cord to the scanner and a wall outlet then turn on the scanner.

For those models without a power switch plug in the power supply to the back of the

scanner. To establish communication between the Scanner and your PC system turn on

the scanner prior to turning on your system. The scanner power and LED/LCD display

will light up. Next after the scanner completes its startup initialization the LED/LCD will

display either ready or the number one. This indicates that the scanner is ready.

Step G: Scanning with ScandAll 21.

1. Launch ScandAll 21 by clicking on the shortcut link on your desktop or manually by

clicking on Start, Programs, Scanner Utility for Microsoft Windows, then

ScandAll 21.

2. After the Untitled Screen has open, click on Scan and choose Select Source.

3. Select the Fujitsu Twain source for your scanner by Highlighting it and clicking

OK. You will only need to do this once unless you are scanning with multiple

sources.

4. Once you are back at the Untitled Screen click on Scan and select To View this

time. The Twain User Interface will popup.

5. Select the scanning parameters that you wish to use – Color mode, resolution,

paper size, etc...

6. Next under Scan Type choose either ADF or Flatbed in the dropdown box.

7. Place your document in the ADF or on the Flatbed face down and click on the Scan

button.

8. After the document is scanned close the Twain User Interface and the image will

appear on the Untitled Screen.

Congratulations! You have successfully completed and tested your scanner installation.

Step H: Installing third party software applications.

After you have successfully installed all the Fujitsu software and hardware, then it is time

to install any additional third party scanning software that you wish to use. Please follow

the software manufacturer's instructions for installation.

*If you do not have any unzipping software installed on your system, you can download a free

evaluation copy at www.winzip.com.

Rev051906A

Windows NT 4.0

Page 9 of 9