Fujitsu FI-5015C Come iniziare - Pagina 11

Sfoglia online o scarica il pdf Come iniziare per Scanner Fujitsu FI-5015C. Fujitsu FI-5015C 26. Image scanner
Anche per Fujitsu FI-5015C: Opuscolo e specifiche (2 pagine), Come iniziare (24 pagine), Istruzioni per la sostituzione e la pulizia dei materiali di consumo Istruzioni per la sostituzione e la pulizia dei materiali di consumo (10 pagine)

Stampa la pagina

Chapter2

2.1 Installing the Scanner

Application

For scanning documents with this scanner, both scanner

driver and image capturing application software (called

"application" hereafter) must be installed on your PC.

The following scanner drivers and applications are pro-

vided:

• Scanner Driver:

FUJITSU TWAIN 32 Scanner Driver

FUJITSU ISIS Scanner Driver

• Scanning application:

ScandAll 21 (for FUJITSU TWAIN 32)

QuickScan Pro

Install the appropiate scanner driver for the application

you will use. The following sections describe installa-

tion of each driver and application.

Please install the scanner driver before

ATTENTION

connecting the scanner to your PC.

If you connect the scanner before install-

ing the scanner driver, the scanner will not

operate correctly.

If you have connected the scanner before-

hand, the "Found New Hardware Wizard"

screen appears (this screen might differ

slightly according to the used OS) . On this

screen, click the [Cancel] button to close

the Wizard screen and install the scanner

driver first.

For FUJITSU TWAIN32 Scanner Driver

■ Preparation

Confirm the following items before installing the appli-

cation.

• Take out the Setup CD-ROM from its pack-

age, but do not insert the Setup CD-ROM

into the CD driver yet.

• Uninstall any older version of FUJITSU

TWAIN 32 driver if already installed.

Uninstall [Scanner Utility for Microsoft Win-

ATTENTION

dows] from [Add/Remove Programs] of the

control panel.

INSTALLATION OF THE SCANNER

(Trial) (for FUJITSU ISIS )

fi-5015C Image Scanner Getting Started

■ Installing the FUJITSU TWAIN32

Scanner Driver

Windows XP screenshots are used in this

ATTENTION

section as examples. The windows and

operations may slightly vary depending on

your OS

1. Turn on your PC and log on to Windows.

When using Windows 2000 or Windows

ATTENTION

XP, log on as a user with "Administrator"

privileges.

2. Insert the Setup CD-ROM into the CD drive.

⇒

<SETUP DISK START UP SCREEN> appears.

This screen may not appear when the

ATTENTION

"Autoplay" setting of your PC is OFF. In

this case, run "Install.exe" in this CD-ROM

directly from the "Explorer" or "My Com-

puter".

3. Click [INSTALL PRODUCTS].

4. Click [TWAIN Driver] on the window below.