Fujitsu FI-5015C Come iniziare - Pagina 10

Sfoglia online o scarica il pdf Come iniziare per Scanner Fujitsu FI-5015C. Fujitsu FI-5015C 24. Image scanner
Anche per Fujitsu FI-5015C: Come iniziare (26 pagine), Opuscolo e specifiche (2 pagine), Istruzioni per la sostituzione e la pulizia dei materiali di consumo Istruzioni per la sostituzione e la pulizia dei materiali di consumo (10 pagine)

Stampa la pagina

Chapter2

2.1 Installing the Scanner

Application

For scanning documents with this scanner, both scanner

driver and image capturing application software (called

"application" hereafter) must be installed on your PC.

The following scanner drivers and applications are pro-

vided:

• Scanner Driver:

TWAIN Scanner Driver

ISIS Scanner Driver

• Scanning application:

ScandAll PRO (For TWAIN driver/ISIS driver)

QuickScan Pro

Install the appropriate scanner driver for the application

you will use. The following sections describe installa-

tion of each driver and application.

Please install the scanner driver before

ATTENTION

connecting the scanner to your PC.

If you connect the scanner before install-

ing the scanner driver, the scanner will not

operate correctly.

If you have connected the scanner before-

hand, the "Found New Hardware Wizard"

screen appears (this screen might differ

slightly according to the used OS) . On this

screen, click the [Cancel] button to close

the Wizard screen and install the scanner

driver first.

For TWAIN Scanner Driver

■ Preparation

Confirm the following items before installing the appli-

cation.

• Take out the Setup DVD-ROM from its

package, but do not insert the Setup DVD-

ROM into the DVD driver yet.

• Uninstall any older version of TWAIN driver

if already installed.

Uninstall [Scanner Utility for Microsoft Win-

ATTENTION

dows] from [Add/Remove Programs] of the

control panel.

INSTALLATION OF THE SCANNER

(Trial) (for ISIS )

■ Installing the TWAIN Scanner

Driver

Windows XP screenshots are used in this

ATTENTION

section as examples. The windows and

operations may slightly vary depending on

your OS

1. Turn on your PC and log on to Windows.

Be sure to log on as a user with "Adminis-

ATTENTION

trator" privileges.

2. Insert the Setup DVD-ROM into the DVD drive.

⇒

<SETUP DISK START UP SCREEN> appears.

This screen may not appear when the

ATTENTION

"Autoplay" setting of your PC is OFF. In

this case, run "AutoPlayer.exe" in this

DVD-ROM directly from the "Explorer" or

"My Computer".

3. Click [INSTALL], and then click [TWAIN

Driver].

4. Error Recovery Guide Installation window

appears.

Error Recovery Guide is a software that dis-

plays troubleshooting information on screen

when any scanner error occurs. Although this

software's installation is highly recommended,

it can be installed later if you do not install it in

this step.