Fujitsu fi-6770 Series Manuale introduttivo - Pagina 3
Sfoglia online o scarica il pdf Manuale introduttivo per Scanner Fujitsu fi-6770 Series. Fujitsu fi-6770 Series 26. Image scanner
Anche per Fujitsu fi-6770 Series: Manuale d'uso (26 pagine), Manuale delle procedure di installazione (6 pagine), Opuscolo (2 pagine), Manuale introduttivo (14 pagine), Istruzioni per la sostituzione e la pulizia dei materiali di consumo (22 pagine)
Stampa la pagina
Regulatory Information
FCC Declaration
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is located.
• Consult your dealer or an experienced radio/TV technician.
FCC warning: Changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
The use of a shielded interface cable is required to
comply with the Class B limits of Part 15 of FCC
rules.
The length of the Power cable must be 3 meters
(10 feet) or less.
Canadian DOC Regulations
This digital apparatus does not exceed the Class B limit for
radio noise emissions from digital apparatus set out in the
Radio interference Regulations of the Canadian Department of
Communications.
This Class B digital apparatus complies with Canadian ICES-
003.
Le présent appareil numérique n'émet pas de parasites
radioélectriques dépassant les limites applicables aux appar-
eils numériques de la classe B et prescrites dans le Règle-
ment sur le brouillage radioélectrique dictées par le Ministère
des Communications du Canada.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Bescheimigung des Herstellers/
Importeurs
Für den fi-6670/fi-6770/fi-6750S wird folgendes bescheinigt:
• In Übereinsstimmung mit den Bestimmungen der
EN45014(CE) funkentstört
• Maschinenlärminformationsverordnung 3. GPSGV: Der
höchste Schalldruckpegel beträgt 70 dB (A) oder weniger,
gemäß EN ISO 7779.
Dieses Gerät wurde nicht für die Benutzung in unmittelbarer
Umgebung starker Lichtquellen (z. B. Projektoren) konzipiert.
®
ENERGY STAR
PFU LIMITED, a Fujitsu company, has deter-
mined that this product meets the ENERGY
®
STAR
guidelines for energy efficiency.
®
ENERGY STAR
is a registered trademark
of the United States.
Use in High-Safety Applications
This product has been designed and manufactured on the
assumption that it will be used in office, personal, domestic,
regular industrial, and general-purpose applications.
It has not been designed and manufactured for use in applica-
tions (simply called "high-safety applications" from here on)
that directly involve danger to life and health when a high
degree of safety is required, for example, in the control of
nuclear reactions at nuclear power facilities, automatic flight
control of aircraft, air traffic control, operation control in mass-
transport systems, medical equipment for
sustaining life, and missile firing control in weapons systems,
and when provisionally the safety in question is not ensured.
The user should use this product with adopting measures for
ensuring safety in such high-safety applications. PFU LIMITED
assumes no liability whatsoever for damages arising from use
of this product by the user in high-safety applications, and for
any claims or compensation for damages by the user or a third
party.
Conventions
Symbols Used In This Manual
For notational conventions, the following symbols are used in
this manual.
This symbol alerts operators to particularly impor-
tant information. Be sure to read this information.
This symbol alerts operators to helpful advice
regarding operation.
Naming Conventions in This Manual
■ Scanners
The scanners are indicated as follows:
Model
fi-6670
fi-6770/fi-6750S
The explanation in this manual bases on the following
models:
•ADF type: fi-6670
•Flatbed type: fi-6770
3
Indication
ADF type
Scanner
Flatbed type