Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Manuale delle procedure di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale delle procedure di installazione per Scanner Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf. Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf 9. Image scanner
Anche per Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf: Manuale delle procedure di installazione (7 pagine), Opuscolo (2 pagine), Procedure di installazione (3 pagine), Procedure di installazione (3 pagine), Procedure di installazione (3 pagine), Opuscolo e specifiche (2 pagine), Opuscolo e specifiche (2 pagine), Catalogo illustrato delle parti di ricambio (22 pagine), Procedura di installazione (5 pagine)

Fujitsu SCSI Scanner Installation Procedures

Next go to the NT diagnostics window and check for resource conflicts. The SCSI controller

listed as "aic78xx" should not be sharing its IRQ with any other devices in the system.

Step C: Installing the drivers from the Setup CD.

To begin it is recommended that you install the drivers first before connecting the scanner.

Installing the ASPI-Twain driver.

The STI-Twain drivers are not supported by Windows NT, consequently, you must install

the ASPI-Twain driver.

1. Insert the Scanner Setup CD into your CD Rom.

2. Next please complete the pre-registration box when it appears and click the submit

button.

3. Afterwards close your browser and click the Install Products button on the Scanner

Setup Menu.

4. On the next screen click on Twain Driver and you may be presented with the option

to install the Error Recovery Guide.

5. After you have installed the Error Recovery Guide (or not) follow the prompts to

complete the twain driver installation.

6. Do not reboot at this time!

Rev051906A

Windows NT 4.0

Page 4 of 9