Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Procedura di installazione - Pagina 3

Sfoglia online o scarica il pdf Procedura di installazione per Scanner Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf. Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf 5. Image scanner
Anche per Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf: Manuale delle procedure di installazione (7 pagine), Manuale delle procedure di installazione (9 pagine), Opuscolo (2 pagine), Procedure di installazione (3 pagine), Procedure di installazione (3 pagine), Procedure di installazione (3 pagine), Opuscolo e specifiche (2 pagine), Opuscolo e specifiche (2 pagine), Catalogo illustrato delle parti di ricambio (22 pagine)

M3093GX\DG\M3096G\GX\M3097G+\DG

Fi-4340C\Fi-4530C\Fi-4640S\M4097D\Fi-4750C\L\Fi-5750 SCSI

Connecting SCSI cable: Located on the back of the scanner are the SCSI ports.

Depending on the model the ports may be either a High Density 50-pin (HD-50) or a 50-

pin Centronics. Use the appropriate cable to connect the scanner to the SCSI controller

in your PC. Ensure all connections are securely fastened.

Powering On: Connect the power cord to the scanner and a wall outlet then turn on the

scanner. For those models without a power switch plug in the power supply to the back

of the scanner. For proper communication between the Scanner and the Workstation,

switch on the scanner prior to switching on the workstation. The scanner power and

LCD display will light up. Next after the scanner completes its startup initialization the

LCD will display either ready or the number one. This indicates that the scanner is

ready.

Step F: Installing the ISIS driver.

1. Create a new folder and name it ISIS Download.

2. Next go to our Web page -

3. In the sub frame under the Product Support column click on Scanners.

4. On the next page select Drivers and Downloads.

5. Afterwards click on ISIS Software Drivers.

6. Locate the appropriate ISIS driver for your scanner by cross-referencing the scanner

model column on the left to the software column.

7. Double click on the driver file name and the File Download box will popup.

8. Click on Save and then use the browse (or other folder navigation) button until you

have the ISIS Download folder you created in the Save In Box.

9. Click Save.

10. When completed close the Download Complete window and go to the ISIS

Download folder.

11. Open the folder and you will see the saved ISIS driver file. Double click on the file to

unzip it and the WinZip* self-extractor box will popup. Click on browse and select the

ISIS Download folder, then click on Extract. The file will begin to unzip and when

finished a message box will report the number of files unzipped. Click on OK and

close WinZip.

Win95\98\ME Installation Procedure

www.fcpa.com

and click on Support & Downloads.

Rev052104A