Brother DCP-9045CDN Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Server di stampa Brother DCP-9045CDN. Brother DCP-9045CDN 7. Scan to ftp (file transfer protocol)
Anche per Brother DCP-9045CDN: Opuscolo e specifiche (4 pagine), Manuale di configurazione rapida (32 pagine), Pulizia e cura (7 pagine), Manuale di servizio (10 pagine), Manuale di avvio rapido (10 pagine)

Stampa la pagina
Brother DCP-9045CDN Manuale
5: How to Scan to FTP
As discussed, scanning to an FTP server can either be done manually or through a profile.
The following steps show you how to do both.
5.1: How to manually scan to FTP
1.
Put the document face up in the ADF, or face down on the scanner glass.
2.
Press
3.
Press
4.
Use the dial pad to enter the FTP host address (for example ftp.example.com' Up to 60
characters) or the IP address (for example 192.23.56.189). Press OK.
5.
Use the dial pad to enter the destination folder (for example /brother/abc/, up to 60
characters). Press OK.
6.
Press
If you choose 'Enter Username', go to Step 10.
If you choose 'Change Setting', go to Step 7.
7.
Choose one of the options below.
8.
Press
9.
Press
10. Use the dial pad to enter the username. Press OK.
11. Use the dial pad to enter the password. Press OK.
12. Do one of the following:
13. Press
Colour Start and go to Step 15.
Note
If you want to change the file name manually, go to step 14.
4
14. Press
15. The LCD shows 'Connecting'. When the connection to the FTP server is successful the
machine starts the scanning process.
Scan to FTP
(Scan).
or
to choose 'Scan to FTP'. Press OK.
or
to choose 'Enter Username or Change Setting'. Press OK.
Press
or
to choose Colour 150 dpi, Colour 300 dpi or Colour 600 dpi. Press
OK and go to Step 8.
Press
or
to choose B&W 200 dpi or B&W 200x100 dpi. Press OK and go to
Step 9.
or
to choose 'PDF or JPEG'. Press OK.
or
to choose 'PDF or TIFF'. Press OK.
If you want to start scanning, press Mono Start or Colour Start and go to Step
15.
If you want to change the file name, go to Step 13.
or
to choose a file name you want to use and press OK. Press Mono Start or
or
to choose <Manual>. Press OK.
Enter the file name you want to use (up to 15 characters) and press OK. Press
Mono Start or Colour Start.
-5-