Brother HL-4150CDN Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Server di stampa Brother HL-4150CDN. Brother HL-4150CDN 25. Printer
Anche per Brother HL-4150CDN: Manuale di configurazione rapida (2 pagine), Sicurezza e legalità (21 pagine), Manuale d'uso (20 pagine)

• This product is heavy and weighs more than 21.0 kg for Printer, and more than 26.5 kg for

MFC/DCP. To prevent injuries when moving or lifting this product, make sure to use at least

two people. Be careful not to pinch your fingers when you set the product back down.

• If you use a Lower Tray, carry it separately from your product.

(MFC only)

Use caution when installing or modifying telephone lines. Never touch telephone wires or

terminals that are not insulated unless the telephone line has been unplugged at the wall socket.

Never install telephone wiring during a lightning storm. Never install a telephone wall socket in

a wet location.

(MFC only)

When using your telephone equipment, basic safety precautions should always be followed to

reduce the risk of fire, electrical shock and injury to people, including the following:

1 DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen sink

or washing product, in a wet basement or near a swimming pool.

2 Avoid using this product during an electrical storm. There may be a remote risk of electric

shock from lightning.

3 DO NOT use this product to report a gas leak in the vicinity of the leak.

4 We DO NOT advise using an extension lead.

5 Never install telephone wiring during a lightning storm. Never install a telephone wall socket

in a wet location.

6 If any cables become damaged, disconnect your product, and contact your Brother dealer.

7 DO NOT place any objects on the product, or obstruct the air vents.

8 This product should be connected to an adjacent grounded AC power source within the

range indicated on the rating label. DO NOT connect it to a DC power source or inverter. If

you are not sure, contact a qualified electrician.

SAVE THESE INSTRUCTIONS