Fujitsu ETERNUS DX410 Manuale d'uso - Pagina 24

Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento Fujitsu ETERNUS DX410. Fujitsu ETERNUS DX410 42. Server connection, (iscsi) for hp-ux
Anche per Fujitsu ETERNUS DX410: Manuale d'uso (35 pagine), Manuale di configurazione (28 pagine)

Stampa la pagina

Chapter 6

Setting Up the VMware ESX Server

6.1

For VMware vSphere

Confirm that the [Enabled] checkbox is selected under "Status" on the [General] tab and click [Config-

ure] again.

Confirm that the iSCSI name is displayed in the "iSCSI Name" column and click the [Cancel] button.

Select the [Dynamic Discovery] tab and click the [Add] button.

Enter the IP address for the iSCSI port of the connected ETERNUS DX Disk storage system as the iSCSI

server IP address, confirm that the port is set to "Port 3260" (default), and click the [OK] button.

Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage system is displayed as

follows.

If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, repeat the IP address addi-

tion process for each iSCSI port. (Repeat

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

Step 7

through

Step

9.)

ESX

P3AM-3412-13ENZ0