Fujitsu Eternus DX90 S2 Manuale di configurazione - Pagina 26

Sfoglia online o scarica il pdf Manuale di configurazione per Immagazzinamento Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 28. Server connection. (fibre channel) for aix
Anche per Fujitsu Eternus DX90 S2: Manuale d'uso (35 pagine), Manuale d'uso (42 pagine), Manuale (18 pagine), Impostazione dell'installazione (20 pagine), Manuale di configurazione Connessione al server (13 pagine), Installazione dell'hardware (23 pagine), Manuale di configurazione (15 pagine), Manuale di configurazione (38 pagine)

Chapter 8

Setting the Multipaths

8.2

Multipath Configuration using Native Multipath

8.2.2

Enabling ALUA (alua_enabled)

ALUA is supported by HP-UX11iv3 Sep 2007 ver. or later.

If the OS supporting ALUA is used, check the "alua_enabled" setting and set it to "true" if it is not.

Check whether the OS supports ALUA.

To check whether the OS supports ALUA, use the "scsimgr" command and check existence of the

"alua_enabled" attribute.

Example of OS supporting ALUA

# scsimgr get_attr | grep alua_enabled

name = alua_enabled

If executing the command displays nothing, the OS does not support ALUA. In this case, the operations

described below are not required.

Check the "alua_enabled" setting.

Use the "scsimgr" command to check the "alua_enabled" attribute for each LUN.

Execute the command for all LUNs in the ETERNUS DX.

Example for checking the "alua_enabled" setting

# scsimgr get_attr -D /dev/rdisk/disk25 -a alua_enabled

name = alua_enabled

current = true

default = true

saved = true

If "current" and "saved" are indicated as "true", ALUA is already enabled. In this case, the operations

described below are not required.

Set "alua_enabled".

Use the "scsimgr" command to set the "alua_enabled" attribute to "true" for each LUN.

Example for setting "alua_enabled"

# scsimgr save_attr -D /dev/rdisk/disk25 -a alua_enabled=true

Value of attribute alua_enabled saved successfully

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

SCSI ATTRIBUTES FOR LUN : /dev/rdisk/disk25

P3AM-3402-14ENZ0