Fujitsu ETERNUS2000 200 Manuale di connessione al server - Pagina 12

Sfoglia online o scarica il pdf Manuale di connessione al server per Immagazzinamento Fujitsu ETERNUS2000 200. Fujitsu ETERNUS2000 200 32. Disk storage systems (fibre channel) for oracle solaris
Anche per Fujitsu ETERNUS2000 200: Manuale (28 pagine), Manuale (21 pagine), Manuale di connessione al server (25 pagine), Manuale di configurazione (4 pagine), Manuale di connessione (19 pagine), Utilizzo di prodotti opzionali (2 pagine)

Chapter 3

Note the following issues when connecting the ETERNUS Disk storage system to a server.

3.1

Connection Notes for Windows Server® 2008 R2 and

Windows Server® 2008

Before the ETERNUS Disk storage system is connected to a server running Windows Server®

2008 R2 or Windows Server® 2008, the ETERNUS Disk storage system firmware should be

upgraded to a version that is Windows Server® 2008 R2 or Windows Server® 2008 compatible.

Refer to the "Server Support Matrix" for a list of usable ETERNUS Disk storage system firmware

versions.

3.2

Connection Notes for PRIMERGY/PRIMEQUEST

1000 Series

3.2.1

•

The following operation conditions are recommended to maintain storage system reliability:

•

The following cluster configuration is supported for Windows®:

For details on servers which support cluster configuration, consult your FUJITSU sales represen-

tative.

3.2.2

•

Only the same type of Fibre Channel cards can be installed together. Different types of Fibre

Channel cards cannot be mixed.

P3AM-2922-05ENZ0

ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®

Notes

Multiple paths

Use of drivers for ETERNUS Disk storage systems which support path redundancy control

Configure a multipath environment, and select a driver for ETERNUS Disk storage

systems which supports path redundancy control to increase redundancy and reliability of

the connection between the ETERNUS Disk storage systems and the server.

MSCS (Microsoft Cluster Service) configuration

WSFC (Windows Server Failover Cluster) configuration