Brother MFC-9440CN Manuale di avvio rapido - Pagina 6

Sfoglia online o scarica il pdf Manuale di avvio rapido per Server di stampa Brother MFC-9440CN. Brother MFC-9440CN 10. Facsimile equipment
Anche per Brother MFC-9440CN: Opuscolo e specifiche (6 pagine), Manuale di configurazione rapida (34 pagine), Manuale (7 pagine), Elenco di riferimento delle parti (43 pagine), Pulizia e cura (7 pagine), Manuale di configurazione rapida (34 pagine)

DCP9040CN, DCP9045CDN, MFC9440CN & MFC9840CDW

PAPER FEED FRAME – INSTALLATION

1. Place the belt cleaner release harnesses back on the printer frame. Be sure to place the wire harness on

the paper feed frame assembly back through the harness guide.

2. Place the wire harnesses back into the PF CR harness. The wide end of the PF CR harness will face the

bottom of the machine when installed. Feed the wire harness back through the printer frame BEFORE

attaching it to the printer frame. Leave slack in the wire harness.

3. Place the frame unit back in the machine with the assembly as far to the RIGHT as possible. DO NOT

push it to the left at this time. Be sure that the metal ground tab for the center screw is not caught under

the frame unit.

4. Locate the white cam shown in figure 1. Use a screwdriver or other object to hold the cam in the UP

position (pushed towards the back of the machine). Leave the cam in this position during the installation

procedure.

NO PAPER FEED Message, Clicking Noise

March 3, 2008

Figure 1

Page 6 of 10

SERVICE

UPDATE No.

F1249