Brother 2 Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Software Brother 2. Brother 2 39. Hewlett-packard laser printer user guide
Anche per Brother 2: Manuale d'uso (15 pagine)

Stampa la pagina

Repeat steps

and

with a weeding box.



The weeding box is created.

a Weeding box

Memo

• The data for a created weeding box is saved on a layer

separate from that for the pattern data.

for each object that will be cut

Exporting Data as FCM File

Save data as an FCM file on a computer or USB flash drive, and

then use a USB flash drive to transfer the data to the cutting

machine.



For details on transferring data directly from

CanvasWorkspace to a cutting machine, see "Sending Data

to the Machine" on page 8.

■ Saving to a USB Flash Drive

Plug the USB flash drive into a USB port on the computer.

In CanvasWorkspace, select [Export/Transfer FCM File]

from the [File] menu.

Note

• In order to export data for a roll feeder, [Rolled Material]

must have been selected under [Artboard Size] when the

data was edited. Before exporting the data, recheck this

setting. For details, see "Creating Data" on page 4.

Select [Export FCM File].

Select [USB Drive (*)] as the destination, and then click

[Save].

This designation differs depending on the operating system

being used.



The data is saved as an FCM file on the USB flash drive.