Brother CP-1800 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Software Brother CP-1800. Brother CP-1800 27. Copyboard
Anche per Brother CP-1800: Manuale d'uso (19 pagine), Opuscolo e specifiche (4 pagine), Elenco di riferimento delle parti (18 pagine)

Position of the wall-mounting bar in relation to the copyboard
2
Using a 5/16 in. (8 mm) drill bit, drill a hole at each point marked on the
wall.
3
Insert one of the enclosed anchors into each hole, and then push it into
the wall until the teeth on the rim firmly grip the wall.
4
Tighten each screw (by turning it clockwise)
approximately 20 turns.
a
The screws must be tightened by hand.
Do not use an electric screwdriver,
otherwise the copyboard may fall down.
10.2 in.
(259 mm)
10.2 in.
(259 mm)
1.9 in.
(48 mm)
36.7 in.
(932 mm)
PUSH
2. Setup
5