Brother CP-2000 Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Software Brother CP-2000. Brother CP-2000 33. Copyboard
Anche per Brother CP-2000: Manuale d'uso (19 pagine), Opuscolo e specifiche (4 pagine), Elenco di riferimento delle parti (18 pagine)

2. Setup

To switch between vertical and horizontal mounting, attach the printer

to a different edge of the copyboard.

While holding both sides of the copyboard, hook the brackets at the

back of the copyboard onto the wall-mounting bar pegs.

Loosen the screws on the printer cable plug, and then remove the plug.

While holding the copyboard to prevent it from falling, remove the four

knobs used to attach the printer.

Place the printer on the other edge of the copyboard (either the bottom or

the right side as seen from the back of the copyboard), and then attach the

printer by installing the knobs.

Remove the seals covering the mounting holes that you will use to

install the printer, and then affix the removed seals to cover unused

mounting holes. Additional seals are enclosed if the original seals

become lost or damaged.

Reconnect the printer cable plug and tighten its screws.

Do not release the copyboard until you are sure that it is securely mounted

on the wall-mounting bar, otherwise the copyboard may fall down.