Brother CP-2000 Manuale d'uso - Pagina 23

Sfoglia online o scarica il pdf Manuale d'uso per Software Brother CP-2000. Brother CP-2000 33. Copyboard
Anche per Brother CP-2000: Manuale d'uso (19 pagine), Opuscolo e specifiche (4 pagine), Elenco di riferimento delle parti (18 pagine)

Stampa la pagina

Troubleshooting

If you can't solve a difficulty with your copyboard using this manual, please see page 25

for Brother numbers to call for assistance.

Problem

The POWER indicator does

not light up.

e ,

d , or

f is

pressed, but the writing

surface does not move.

Nothing is printed out after

e or

d is pressed.

Paper does not feed from

the printer.

The writing on the writing

surface of the copyboard

cannot be removed with

the eraser.

The writing is not printed

out clearly.

• Check that the AC adaptor cord is correctly plugged

into the DC jack on the left side of the printer and

that the AC cord is correctly plugged into both the AC

adaptor and the electrical wall outlet.

Power supply (page 18)

• Check that the power supply switch on the left side of

the printer is set to "|".

• Check that the printer cable plugs are correctly

connected.

• Check if the PAPER indicator is lit. If it is lit, replace the

roll of paper in the paper compartment.

Loading the paper (page 17)

• Check that the paper compartment cover is closed.

• Open the paper compartment and remove the paper.

Then, use scissors to cut off the wrinkled portion of

paper from the roll and load the paper again.

Loading the paper (page 17)

• Check that only the specified Dry Erase markers are

used. Carefully wipe the writing surface with a soft

cloth dampened with water and a mild detergent.

• Use a Dry Erase marker to write over the writing that

cannot be erased, and then try erasing the writing

with the enclosed eraser.

• Clean off the writing surface. Use a soft damp cloth to

wipe off hard-to-remove spots.

• Check that the printer cable plugs are correctly

connected.

• Clean the print head.

Cleaning the print head (page 22)

• Adjust the scanner.

Adjusting the scanner (page 23)

4. Maintenance

Solution