Brother DCP-375CW Manuale di configurazione rapida - Pagina 23

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Software Brother DCP-375CW. Brother DCP-375CW 29. Inkjet dcp/mfc
Anche per Brother DCP-375CW: Manuale di configurazione rapida (43 pagine), Manuale di configurazione rapida (39 pagine), Elenco di riferimento delle parti (32 pagine)

Safety and Legal

To use the machine safely

Please keep these instructions for later reference and read them before attempting any maintenance.

WARNING

There are high voltage electrodes inside the machine.

Before you clean the inside of the machine, make sure you

have unplugged the power cord from the electrical socket.

Doing this will prevent an electrical shock.

DO NOT handle the plug with wet hands. Doing this might

cause an electrical shock.

DO NOT pull in the middle of the power cord. Doing this

might cause an electrical shock.

DO NOT use flammable substances, any type of spray,

liquid or aerosol cleaners to clean the inside or outside of

the machine. Doing this may cause a fire or electrical

shock.

If the machine becomes hot, releases smoke, or generates

any strong smells, immediately unplug the machine from

the electrical socket. Call your Brother dealer or Brother

Customer Service.

If metal objects, water or other liquids get inside the

machine, immediately unplug the machine from the

electrical socket. Call your Brother dealer or Brother

Customer Service.

This product must be installed near an electrical socket

that is easily accessible. In case of an emergency, you

must unplug the power cord from the electrical socket to

shut off the power completely.

This product should be connected to an AC power source

within the range indicated on the rating label. DO NOT

connect it to a DC power source or inverter. If you are not

sure, contact a qualified electrician.

Always make sure the plug is fully inserted.

DO NOT use the machine if the power cord is frayed or

damaged, doing so may cause a fire.