AEG ARCTIS Manuale d'uso - Pagina 9

Installation option 2:

Operation of E-appliances is possible

even without a ventilation opening in

the furniture plinth. The fresh air able to

enter under the appliance is sufficient

for ventilation. The function and life of

the appliance are not impaired. The

warmed air must be able to be exhaust-

ed upwards through the air shaft (min.

200 cm

) on the furniture back. If the

appliance is ventilated without a plinth

opening, however, the energy consump-

tion may differ from that specified in

the brochure.

Important note! In order not to impair the function of the appliance,

never cover or obstruct the ventilation openings.

Building-in

See installation instructions supplied.

Please check whether, after installing your appliance and especially

after rehingeing the door, the door seal seals right round. An untight

door seal may lead to heavy frosting and thereby to a higher power

consumption (see also „What to do if...").

A correctly installed, earthed socket is required for the electrical sup-

ply. The supply must have a fuse rating of at least 10 Amps. If the

socket is not accessible once the appliance is built in, the electrical

installation must include suitable means of isolating the appliance

from the mains (e.g. a fused spur).

Before initial start-up, refer to the appliance rating plate to ascertain

if supply voltage and current values correspond with those of the

mains at the installation location.

e.g.: AC 220 ... 240 V 50 Hz or

220 ... 240 V ~50 Hz

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

Installation