AEG NSC8M191DS Manuale d'uso - Pagina 13
Sfoglia online o scarica il pdf Manuale d'uso per Frigorifero AEG NSC8M191DS. AEG NSC8M191DS 32.
Stampa la pagina
• Enable or disable the Rest mode
• Enable or disable the Sabbath mode
• Reset the appliance to factory settings
Activating the Setting mode
To activate the Setting mode:
1. Press and hold the ECO button for
approximately 3 seconds. When the
Setting mode is being activated, the
display shows a blinking
2. Once the Setting mode is switched
on, the display shows
To deactivate the Setting mode, press
and hold the ECO button for
approximately 3 seconds.
The Setting mode deactivates
automatically if you do not interact with
the control panel for 60 seconds.
Navigating the Setting mode
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap the fridge temperature button (on
the left) to change the parameter.
Tap the freezer temperature button
(on the right) to change the
parameter value.
Display
ECOMETER indicator
In order to switch the ECOMETER on or
off:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
.
.
.
Default parame‐
ters
ECOMETER indica‐
tor
Button sounds
Temperature units
Sabbath mode
Rest mode
Factory settings
.
2. Tap
repeatedly. The indicator will
show respectively
or
for the disabled ECOMETER
indicator.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Button sounds
You can enable or disable the button
sounds in the Setting mode. To enable or
disable the sounds:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
repeatedly until you see
Tap
to switch the sounds either
on or off. The indicator will change to
for the enabled or
disabled sounds.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Temperature units
Using the Setting mode, you can change
the temperature unit displayed on the
control panel from Celsius to Fahrenheit.
To change the temperature unit:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
repeatedly until you see
and
. Tap the indicator showing
the unit to select between
Celsius and
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Rest mode
The Rest mode ensures food
preservation while minimizing energy
consumption during periods when the
appliance is not used for a long time.
To switch on the Rest mode:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
ENGLISH
13
for the enabled
.
for the
.
for
for Fahrenheit.
.
.