Fujitsu SLR 100 GBYTE Manuale operativo - Pagina 10

Sfoglia online o scarica il pdf Manuale operativo per Immagazzinamento Fujitsu SLR 100 GBYTE. Fujitsu SLR 100 GBYTE 21.

SLR 25/50 Gbyte

Important notes

In this chapter you will find information regarding safety which is essential to take note of

with your drive.

This device complies with the relevant safety regulations for data processing equipment, including

electronic office machines for use in an office environment. If you have any questions, contact your

sales outlet or our customer service center.

•

This device has been developed for use in approved systems with a fire-proof casing (in

accordance with IEC 950 / EN 60950).

•

Note the power loss and the notes on environmental conditions in the "Important notes"

chapter of the system unit's Operating Manual.

CE certificate

The shipped version of this drive complies with the requirements of the EC Guideline

89/336/EEC "Electromagnetic compatibility".

Compliance was tested in a typical system configuration.

When installing the drive, observe the specific installation notes in the Operating

Manual or Technical Manual of the receiving device.

Please note the information provided in the chapter "Important notes" in the Operating

Manual of the system unit or in the manual "Safety, Guarantee and Ergonomics".

The following steps must be performed to install the drive:

•

Setting the jumpers (e. g. SCSI address, parity)

•

Mounting the drive

•

Connecting the drive

•

Installing the software required (drivers, backup program)

The drivers required for operating SCSI drives are either part of the operating system or

are provided with the backup software.

2 - English

A26361-H583-Z100-1-7419