Brother MFC-5460CN Manuale di configurazione rapida - Pagina 25
Sfoglia online o scarica il pdf Manuale di configurazione rapida per Software Brother MFC-5460CN. Brother MFC-5460CN 34. Mfc-5460cn; mfc-5860cn
Anche per Brother MFC-5460CN: Manuale di configurazione (23 pagine), Manuale di configurazione rapida (34 pagine), Manuale di servizio (9 pagine), Manuale di configurazione rapida (21 pagine)
Installing the Driver & Software
For USB Interface Users
3
(For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on pages 4 through 13.
Note
®
For Mac OS
X 10.2.0 to 10.2.3 users, upgrade to
®
Mac OS
X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
Lift the scanner cover until it locks securely into
the open position.
2
Connect the USB cable to the USB socket
marked with a
USB socket inside the machine on the right as
shown below.
®
X 10.2.4 or greater)
®
X, visit
symbol. You will find the
3
Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine. Then,
connect the cable to your computer.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
4
Lift the scanner cover to release the lock (
Gently push the scanner cover support
down (
) and close the scanner cover (
Note
Make sure that the machine is turned on by
connecting the power cord.
5
Turn on your Macintosh
6
Put the supplied CD-ROM into your CD-ROM drive.
Macintosh
).
).
®
.
23
®