Fujitsu N7100E Come iniziare - Pagina 8

Sfoglia online o scarica il pdf Come iniziare per Stampante Fujitsu N7100E. Fujitsu N7100E 24.

Stampa la pagina

FCC warning: Changes or modifications not expressly

approved by the party responsible for compliance could

void the user's authority to operate the equipment.

NOTICE The use of a shielded interface cable is

required to comply with the Class B limits of

Part 15 of FCC rules. The length of the

power cable must be 3 meters (10 feet) or

less.

Canadian DOC Regulations

This digital apparatus does not exceed the Class B limit

for radio noise emissions from digital apparatus set out in

the Radio interference Regulations of the Canadian

Department of Communications.

This Class B digital apparatus complies with Canadian

ICES-003.

Le présent appareil numérique n'émet pas de parasites

radioélectriques dépassant les limites applicables aux

appareils numériques de la classe B et prescrites dans le

Règlement sur le brouillage radioélectrique dictées par le

Ministère des Communications du Canada.

Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

Bescheinigung des Herstellers/

Importeurs

Für den Scanner wird folgendes bescheinigt:

 In Übereinsstimmung mit den Bestimmungen der

EN45014(CE) funkentstört

 Maschinenlärminformationsverordnung 3. GPSGV:

Der höchste Schalldruckpegel beträgt 70 dB (A) oder

weniger, gemäß EN ISO 7779.

Dieses Gerät wurde nicht für die Benutzung in

unmittelbarer Umgebung starker Lichtquellen (z. B.

Projektoren) konzipiert.

ENERGY STAR

PFU Limited, a Fujitsu company, has

determined that this product meets the

ENERGY STAR

guidelines for energy

efficiency. ENERGY STAR

registered trademark of the United

States.

is a

Use in High-safety Applications

This product has been designed and manufactured on

the assumption that it will be used in office, personal,

domestic, regular industrial, and general-purpose

applications. It has not been designed and manufactured

for use in applications (simply called "high-safety

applications" from here on) that directly involve danger to

life and health when a high degree of safety is required,

for example, in the control of nuclear reactions at nuclear

power facilities, automatic flight control of aircraft, air

traffic control, operation control in mass-transport

systems, medical equipment for sustaining life, and

missile firing control in weapons systems, and when

provisionally the safety in question is not ensured. The

user should use this product with adopting measures for

ensuring safety in such high-safety applications. PFU

Limited assumes no liability whatsoever for damages

arising from use of this product by the user in high-safety

applications, and for any claims or compensation for

damages by the user or a third party.

■ Failure and Repair

If repairing the scanner or replacing parts is required, an

abnormal change is detected, or other problems which

indicate a scanner failure are detected, first, refer to

"Appendix A Troubleshooting" (page 18) in this manual

or "Troubleshooting" of the Operator's Guide to check

that the scanner is correctly connected or configured. If

the problem still persists, contact your FUJITSU scanner

dealer or an authorized FUJITSU scanner service

provider.

The user must not perform repairs on the scanner.

PFU assumes no liability for any damage caused by

taking apart the scanner, as doing so is not covered

under the warranty.