Brother Quattro 6000D Manuale operativo - Pagina 24

Sfoglia online o scarica il pdf Manuale operativo per Software Brother Quattro 6000D. Brother Quattro 6000D 29. Kit de actualización iii
Anche per Brother Quattro 6000D: Manuale (42 pagine), Manuale operativo (50 pagine), Manuale operativo (6 pagine), Manuale d'uso (48 pagine), Manuale operativo (21 pagine), Manuale di istruzioni (inglese) (49 pagine), Manuale di istruzioni (inglese) (21 pagine), Manuale di istruzioni (inglese) (48 pagine)

CHANGING THE PATTERN SIZE WHILE MAINTAINING

THE DESIRED THREAD DENSITY (STITCH RECALCULATOR)

In the embroidery edit screen, the size of the pattern

can be changed while the desired thread density is

maintained.

With this function, the pattern will be enlarged or

reduced at a larger ratio than with normal pattern

resizing.

Note

• Be sure to sew trial embroidery using same fabric

and threads as project in order to check the sewing

results.

Press

Select the pattern to be resized, and then

press

Note

• This function cannot be used with alphabet

character patterns, frame patterns or border

patterns. However, a border pattern can be edited

after this function has been used.

• Patterns with a large number of stitches (about

100,001 or more) cannot be resized while

maintaining a desired thread density. The maximum

limit for the number of stitches differs depending on

the data size of pattern.

• If this function is used, thread density is maintained

while the pattern is enlarged/reduced. However, the

needle drop point pattern is not entirely maintained.

Use the normal resizing mode

depending on the results of trial embroidering.

Press

to enter Stitch Recalculator

mode (

Memo

• Stitch Recalculator cannot be used if the key

appears as

When the following message appears, press

→ The pattern will be returned to its original size,

angle, and position as it was before it was edited.