Fujitsu LifeBook Stylistic Q550 Manuale Bios - Pagina 2
Sfoglia online o scarica il pdf Manuale Bios per Tavoletta Fujitsu LifeBook Stylistic Q550. Fujitsu LifeBook Stylistic Q550 23. Q series
Anche per Fujitsu LifeBook Stylistic Q550: Scheda tecnica (6 pagine), Manuale introduttivo (17 pagine), Come iniziare (17 pagine), Manuale di avvio rapido (2 pagine)
Stampa la pagina
S T Y L I S T I C Q 5 5 0 B I O S
Q Series BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your tablet. Your BIOS
is set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS
environment to operate your tablet.
The BIOS Setup Utility configures:
•
Device control feature parameters, such as changing
I/O addresses and boot devices.
•
System Data Security feature parameters, such as
passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility, do the following:
1. Turn on or restart your tablet.
2. Press the [Alt] button when the Fujitsu logo appears
on the screen. This will open the Boot/Application
Menu window.
3. From the Application Menu tab, tap on "BIOS
Setup"; the BIOS Setup utility will open with the
current settings displayed.
3. Tap the setup menu names in the menu bar at the top
of the screen to review or alter the current settings of
the various screens.
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Info,
System, Advanced, Security, Boot, and Exit. This docu-
ment explains each menu in turn, including all
submenus and setup items.
The following procedures allow you to navigate the
setup utility menus:
1. To select a menu, tap the menu name at the top of
the screen or navigate using the up and down arrows
at the bottom of the screen:
2. To select a field within a menu or a submenu, use
the same up/down arrows.
3. To select the different values for each field, tap the
[+] at the bottom of the screen to invoke the option
menu, then tap on the selection you want. To close
the option menu, tap the [-] at the bottom of the
screen.
2
[ ], [ ].
4. To activate a submenu, tap on its name from the
main menu.
5. To return to a menu from a submenu, tap the
submenu name at the top of the screen.
Selecting a field causes a help message
about that field to be displayed on the
right-hand side of the screen.
Tapping the [+] with the highlight on a
selection that is not a submenu or auto
selection will cause a list of all options for
that item to be displayed. Tapping the
item in the list will select the highlighted
choice. Tapping the [-] will close the list.
7. Tapping "Load Setup Defaults" from the Exit menu
resets all items in the BIOS to the default values.
8. Tapping "Exit Saving Changes" from the Exit menu
saves the current configuration and exits the BIOS
Setup Utility. You will be asked to verify this selec-
tion before it is executed.
9. Tapping [F1] at the bottom of the screen gives you a
general help screen.
Entering the Setup Utility After a Configuration
Change or System Failure
If there has been a change in the system configuration
that does not agree with the parameter settings stored in
your BIOS memory, or there is a failure in the system,
the system beeps and/or displays an error message after
the Power On Self Test (POST). If the failure is not too
severe, it will give you an opportunity to modify the
setup utility settings, as described in the following steps:
1.
When you turn on or restart the computer there is a
beep and/or the following message appears on the
screen:
Error message - please run SETUP
program Press <F1>/[Ctrl+Alt+Del]
button to continue, or <F2>/[Rota-
tion] button to enter SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [F1] key or
the [Ctrl+Alt+Del] button.