Fujitsu Lifebook T3010 Manuale Bios - Pagina 2

Sfoglia online o scarica il pdf Manuale Bios per Tavoletta Fujitsu Lifebook T3010. Fujitsu Lifebook T3010 27. T series

Stampa la pagina

L i f e B o o k T S e r i e s T a b l e t P C

T Series BIOS

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the

operating environment for your tablet. Your BIOS

is set at the factory for normal operating conditions,

therefore there should be no need to set or change the

BIOS environment to operate your tablet.

The BIOS Setup Utility configures:

Device control feature parameters, such as changing

■

I/O addresses and boot devices.

System Data Security feature parameters, such

■

as passwords.

Entering the BIOS Setup Utility

To enter the BIOS Setup Utility do the following:

1. Turn on or restart your tablet.

2. Press the [F2] key when a message appears under the

Fujitsu logo prompting you to "Press <F2>: BIOS

Setup". This will open the main menu of the BIOS

Setup Utility with the current settings displayed.

3. Press the arrow keys to scroll through the other

setup menus to review or alter the current settings.

Navigating Through the Setup Utility

The BIOS setup utility consists of six menus: Main,

Advanced, Security, Boot, Info and Exit. This document

explains each menu in turn including all submenus and

setup items.

The following procedures allow you to navigate the

setup utility menus:

1. To select a menu, use the cursor keys:

2. To select a field within a menu or a submenu, use the

cursor keys:

[ ], [ ].

3. To select the different values for each field, press the

[Spacebar] to change to the next higher selection

and [F5] or [-] to go to the next lower selection.

4. To activate a submenu press the [Enter] key.

5. To return to a menu from a submenu, press the

[Esc] key.

6. To go to the Exit menu from any other menu,

press the [Esc] key.

■

Selecting a field causes a help message about that

field to be displayed on the right-hand side of the

screen.

■

Pressing the Enter key with the highlight on a selec-

tion that is not a submenu or auto selection will cause

a list of all options for that item to be displayed.

Pressing the Enter key again will select the high-

lighted choice.

7. Pressing the [F9] key resets all items in the BIOS to

the default values.

8. Pressing the [F10] key saves the current configura-

tion and exits the BIOS Setup Utility. You will be

asked to verify this selection before it is executed.

9. Pressing the [F1] key gives you a general help screen.

Entering the Setup Utility After a Configuration

Change or System Failure

If there has been a change in the system configuration

that does not agree with the parameter settings stored

in your BIOS memory, or there is a failure in the system,

the system beeps and/or displays an error message after

the Power On Self Test (POST). If the failure is not

too severe, it will give you the opportunity to modify

the settings of the setup utility, as described in the

following steps:

1. When you turn on or restart the computer there is

a beep and/or the following message appears on

the screen:

Error message - please run SETUP

program Press <F1> key to continue,

[

], [

<F2> to run SETUP

2. If an error message is displayed on the screen, and

you want to continue with the boot process and start

the operating system anyway, press the [F1] key.

P O I N T S