Fujitsu Lifebook T4010 Manuale Bios - Pagina 6
Sfoglia online o scarica il pdf Manuale Bios per Tavoletta Fujitsu Lifebook T4010. Fujitsu Lifebook T4010 30. Pc
Anche per Fujitsu Lifebook T4010: Manuale (23 pagine)
Stampa la pagina
L i f e B o o k T S e r i e s T a b l e t P C
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA
devices are installed.
Main
Primary Master [FUJITSU MHT2040AT-(PM)]
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Menu Field
Options
■
Type:
Auto
■
None
■
CD-ROM
■
Hard Disk
LBA Format
Total Sectors:
---
Maximum
---
Capacity:
CHS Format
■
Cylinders:
A number between
0 and 65,535
PhoenixBIOS Setup Utility
[Auto]
LBA Format
78140160
40008MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Select Item
-/Space
Change Values
Select Menu
Enter
Select
Figure 2. Primary Master Submenu
Default
Description
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM if a
CD-ROM drive is installed at this connection. If Hard Disk is
selected, you must specify the number of Cylinders, Heads, and Sec-
tors for the drive.
Logical Block Addressing (LBA)
---
The total number of sectors on your hard disk
---
The maximum capacity of your hard disk
Cylinders/Heads/Sectors
–—
This item is active only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
6
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
F9
Setup Defaults
Sub-Menu
F10
Save and Exit