Brother ADS-1600W Manuale di configurazione rapida - Pagina 20

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Scanner Brother ADS-1600W. Brother ADS-1600W 35.

Product Safety Guide

Compilation and Publication Notice

This manual has been compiled and published to provide the latest product safety information at the time of

publication. The information contained in this manual may be subject to change.

For the latest manual, please visit us at http://solutions.brother.com/.

Put the unit on a flat, stable surface that is free from shocks and vibrations, such as a desk. Choose a dry, well

ventilated location where the temperature remains between 5 °C and 35 °C.

WARNING

DO NOT expose the unit to direct sunlight, excessive heat, open flames, corrosive gasses, moisture or

dust. DO NOT place the unit on a carpet or rug, as this will expose it to dust. Doing so may create a risk

of an electrical short or fire. It may also damage the unit and/or render it inoperable.

DO NOT place the unit near radiators, heaters, air conditioners, water, chemicals or devices that

contain magnets or generate magnetic fields. Doing so may create the risk of a short circuit or fire

should water come into contact with the unit (including condensation from heating, air conditioning,

and/or ventilation equipment that may be sufficient to create a short circuit or fire).

DO NOT place the unit near chemicals or in a place where chemical spillage could occur. In particular,

organic solvents or liquids may cause the casing and/or cables to melt or dissolve, risking fire or

electric shock. They may also cause the unit to malfunction or become discoloured.

Slots and openings in the casing, back or bottom of the product are provided for ventilation. The

product should be placed so as not to come into contact with any wall or other device so these

openings are not blocked or covered. Blocking the unit's ventilation could create a risk or overheating

and/or fire.

IMPORTANT

• Always place the unit on a solid surface, never on a bed, sofa, rug, or similar soft surfaces.

• DO NOT place the unit in a "built-in" installation.