Fujitsu LifeBook T4210 Manuale Bios - Pagina 28

Sfoglia online o scarica il pdf Manuale Bios per Tavoletta Fujitsu LifeBook T4210. Fujitsu LifeBook T4210 33. Lifebook t series

Stampa la pagina

L i f e B o o k T S e r i e s T a b l e t P C

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.

Be aware of the operating environment when booting from a CD or you may overwrite files by mistake.

■

A bootable CD-ROM has either a floppy disk or a hard drive format. When a bootable CD-ROM is used,

■

drive allocations change automatically without changing the BIOS setup. If floppy disk format is used, the

CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard

drive is not present or is disabled. A bootable CD-ROM cannot use a C: designation if a formatted internal

hard drive is present since the C: designator is always reserved for the internal hard drive.The boot

sequence ignores new drive designations, but your application software will use the new designations.

In order for a portable USB memory device (e.g., JumpDrive or memory stick) to be recognized in the Boot

■

Device Priority list, it must have been installed before booting the system.

■

Note that some older portable USB memory devices may not be recognized as bootable devices.

The Boot Menu can also be invoked outside of the Setup Utility using the TrustedCore menu or the [F12]

■

(See Using the TrustedCore Menu on page 2 for more information)

key.

Main

Advanced

Boot priority order:

Floppy Disk Drive

Drive0: FUJITSU MHV2040BH

Drive1: None

CD/DVD Drive

NETWORK: B02 D00 Yukon PXE

Excluded from boot order:

USB MEMORY: None

USB HDD: None

Help

ESC

Exit

PhoenixBIOS Setup Utility

Security

Power Savings

Boot Device Priority

-/Space

Change Values

Select Item

Select Menu

Enter

Select

Figure 18. Boot Device Priority Submenu

Boot

Item Specific Help

Keys used to view or

configure devices:

<+>/<Space> or <->

moves the device up or

down.

<x> exclude or include

the device to boot.

Setup Defaults

Sub-Menu

F10

Save and Exit