Fujitsu D2831 Descrizione breve - Pagina 18

Sfoglia online o scarica il pdf Descrizione breve per Scheda madre Fujitsu D2831. Fujitsu D2831 20. Mainboard

Brief description of mainboard

Installing/removing main memory

Technical data

Technology

Total size

Module size

A current list of the memory modules recommended for this mainboard is available

on the Internet at: "http://ts.fujitsu.com/mainboards".

At least one memory module must be installed. Memory modules with different

memory capacities can be combined.

You may use only unbuffered 1.8 V memory modules without ECC.

DDR2-memory modules must meet the PC2-5300U (CL5-5-5) or

PC2-6400U (CL6-6-6) speciﬁcation.

If you use more than one memory module, make sure to distribute the

memory modules over both memory channels. By doing this you use the

performance advantages of the dual-channel mode.

Maximum system performance is achieved when identical memory modules

are used in Channel A and Channel B.

To simplify equipping, the slots are colour coded.

If you are plugging in the memory modules, start with the slot which

is located beside the processor (slot 1).

Slot to be used

Channel A, Slot 1

Channel B, Slot 2

Channel A, Slot 3

Channel B, Slot 4

The installation/removal is described in the "Basic information on mainboard" manual.

4 - English

DDR2 667/800 SDRAM unbuffered DIMM modules 240-Pin; 1.8 V;

64 Bit, no ECC

512 Mbytes to 16 Gbyte DDR2

512, 1024, 2048 or 4096 MByte per module

slot 4

slot 3

Channel B

Channel A

Number of memory modules inserted

A26361-D2831-Z212-1-8N19, edition 1

slot 2

slot 1