Fujitsu D2932 Manuale tecnico - Pagina 25

Sfoglia online o scarica il pdf Manuale tecnico per Scheda madre Fujitsu D2932. Fujitsu D2932 32. For rx330 s1

Replacing the lithium battery

In order to save the system information permanently, a lithium battery is

installed to provide the CMOS-memory with a current. When the charge is too

low or the battery is empty, a corresponding error message is provided. The

lithium battery must then be replaced.

CAUTION!

The lithium battery must be replaced with an identical battery or a battery

type recommended by the manufacturer (CR2032).

Do not throw lithium batteries into the trash can. It must be disposed of

in accordance with local regulations concerning special waste.

Make sure that you insert the battery the right way round. The plus pole

must be on the top!

Figure 8: Replacing the lithium battery

Ê Press the locking spring into direction of the arrow (1), so that the lithium-

battery jumps out of its socket.

Ê Remove the battery (2).

Ê Insert a new lithium battery of the same type into the socket (3) and (4).

D2440/D2932 (RX330 S1)

Technical Manual