Fujitsu F2MC-8FX Series Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Scheda madre Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 20. 8-bit microcontroller
Anche per Fujitsu F2MC-8FX Series: Nota applicativa (12 pagine), Nota applicativa (23 pagine), Manuale di configurazione (18 pagine), Manuale di configurazione (19 pagine), Manuale di configurazione (30 pagine), Nota applicativa (20 pagine), Nota applicativa (21 pagine), Manuale operativo (21 pagine), Manuale di configurazione (23 pagine), Manuale d'uso (24 pagine), Manuale di configurazione (17 pagine)

■ Note on connection

■ Disconnection

1. Remove the BGM adapter from the MCU board. Holding the MCU board firmly, pull the BGM

2. Remove the header board from the MCU board. Remove it with uniform force without applying

• Be sure to connect the BGM adapter connector (CN3). The BGM adapter connector and the

LVD2 detection voltage selector jumper plug have the same shape (see "Figure 5"). The MCU

board may break if the BGM adapter connector is accidentally plugged into the LVD2 detec-

tion voltage selector jumper plug (S2) on the other side of the board.

Figure 5 Connection direction of BGM adapter

• To supply a main clock signal and sub clock signal from the user system, provide an oscillation

circuit on the user system so that it supplies the clock signal to the MCU board via a buffer

circuit.

adapter vertically from the BGM adapter connector on the MCU board.

force to only one point.

LVD4

LVD3

LVD2

LVD1

LVD0

SUB CLOCK

CLK

CLK S.V.

APB8

X0A

X1A

MAIN CLOCK

LVD1

OFF

LVD2