Fujitsu MB91360 SERIES Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Scheda madre Fujitsu MB91360 SERIES. Fujitsu MB91360 SERIES 43. Levelshifter board
Anche per Fujitsu MB91360 SERIES: Manuale d'uso (17 pagine), Nota applicativa (35 pagine), Manuale d'uso (20 pagine)

Stampa la pagina

These three functions are available on the button-bar or from the main menu (Project –

Compile / Make / Build / Abort).

Click on MAKE or BUILD. Messages from the individual language tools will be fed into the

output window at the bottom of the main screen. If the tool chain (C-compiler R Assembler

R Linker) was completed successfully, the message "No Error" will appear.

If you get any errors during compilation, an appropriate message will be generated. Try this

with a simple syntax-error (e.g. delete a semicolon ";" from the end of a C-line) and click on

MAKE again. You will now see a message like this:

Now Making...

main.c

*** c:\softune\sample\..\leddemo1\src\main.c(43) E4062C: syntax error near `for'

------------------------------

Error detected.

------------------------------

To locate the position in the source-file, where the error has occurred, double-click on the

message. The editor will open the appropriate source-file, indicating the error highlighted in

red, depending on the customise settings of the editor. Correct the error and re-compile the

project as explained above.

If more errors occurred, you can go through the error list step by step using the menu "Edit –

Top/Previous/Next/Bottom Error" or using the appropriate buttons which have the same

functions:

To get on-line help about a specific error, select the error message and press F1. In many

cases, you can get some useful hints how to solve the problem. Of cource, you can also

use the HELP-menu anytime during development or debugging.

UG-910006-13

STARTERKIT MB91360

Chapter 3 Getting Started

- 12 -