Fujitsu MB91460 SERIES Come iniziare - Pagina 38

Sfoglia online o scarica il pdf Come iniziare per Scheda madre Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 41. 32-bit microcontroller
Anche per Fujitsu MB91460 SERIES: Manuale d'uso (45 pagine), Nota applicativa (23 pagine), Nota applicativa (26 pagine), Nota applicativa (29 pagine), Nota applicativa (29 pagine)

Stampa la pagina

Chapter 7 Setup / Change Connection PC – Emulation System

„the unique IP address (as set by LAN-Address, see above)"

of emulator"

e.g.

141.187.6.82

When saving again the file Imhosts get sure that your editor (e.g. notepad) will

not add any extension, e.g. .txt, to your file. To get sure, use quotation marks

for the filename:

e.g. File save as:"lmhosts" (or lmhosts.sam)

7.3.4 Checking the network-connection

Disconnect serial RS232 (or USB) cable from Emulator and try to find the emulator:

• Open DOS-Window (or open RUN (Ausführen) in the Start-Menu)

• The command

that means the network is set up right.

The emulator with LAN-adapter is successfully integrated in the network environment

and can be used by the Softune Workbench.

7.3.5 Troubleshooting

If the command

ping my_emulator

emulator by its IP-address: Type command

141.187.6.82

If this will work, then check settings (nickname and IP-address) within Imhosts and

Hosts.

If neither nickname (my_emulator) nor IP-address will work, check settings done

by the program LAN-address and check the file Services.

MCU-AN-391005-E-V17

Getting Started

Figure 26: Edit the File Imhosts.asm

fjicescv

Emulator

should acknowledge with some time-values,

ping Emulator

will reply with a timeout-message, try to find the

- 38 -

, e.g.

ping IP-address

„nickname

ping