Fujitsu SK-91460T-144PMC-GPIO Manuale d'uso - Pagina 27
Sfoglia online o scarica il pdf Manuale d'uso per Scheda madre Fujitsu SK-91460T-144PMC-GPIO. Fujitsu SK-91460T-144PMC-GPIO 47. Mb91460 series
Stampa la pagina
4.5 USER-LEDs & optional LC-Display
Eight LEDs are supplied for user applications. In order to disconnect the LEDs from the
related microcontroller port (Port 15, Pin 0-4 and Port 16, Pin 2-5), the resistor network RN1
can be removed.
Instead of the user-LEDs an alphanumeric LC-Display (optional) can be connected.
The potentiometer RP1 can be used to adjust the contrast of the LC-Display. Pin 15 and 16
of J1 are normally not mounted. If the used LC-Display has pins for LED backlight at this
position, they can be connected here (Pin15: Vcc via 39Ω/0.5W, Pin16: GND).
The following control signals are provided:
14
13
12
D7
D6
D5
LCD
LD7
LD6
LD5
LED
16_5
16_4
16_3
Port
(Optional Pins: Pin15: Vcc via 39Ω/0.5W, Pin16: GND)
© Fujitsu Microelectronics Europe GmbH
SK-91460T-144PMC-GPIO User Guide
Chapter 4 Connectors
Pins for LCD-backligh
Figure 4-4: User LEDs/LCD
11
10
9
8
D4
-
-
-
LD4
16_2
Table 4-3: User LEDs/LCD
t
7
6
5
4
-
E
R/W
RS
LD2
LD1
LD0
15_2
15_1
15_0
- 27 -
3
2
1
16
V0
VCC
GND
LED- LED+
FMEMCU-UG-910074-11
15