Indesit BA 33 FNF Manuale di istruzioni per l'installazione e l'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione e l'uso per Frigorifero Indesit BA 33 FNF. Indesit BA 33 FNF 17. Indesit fridge-freezer instructions for installation and use

Stampa la pagina

How to use the freezer compartment...

For the preparation of food to be frozen, please con-

sult a specialized manual.

Food that has be thawed, even partially, must not be re-

frozen: you must cook it in order to consume it (within 24

hours) or to freeze it once again.

When freezing fresh foods, remember that they should not

touch other previously frozen or deep frozen foods. Place

the food that you wish to freeze in the top compartment

(M) where the temperature will fall below -18°C, which is

ideal for freezing food properly. Remember that proper con-

servation depends on the speed of freezing.

The maximum amount of food you can freeze per day is

indicated on the data plate situated inside the refrigerator

compartment.

The first time, or after the freezer has been inactive, you can

only freeze food after having let the appliance function at

maximum.

Press the freezing button "Super Freeze" (F), yellow lamp

(E) lit, and insert the food to be frozen. After 24 hours, or

once the optimum temperatures have been reached, the

rapid freezing function will switch itself off automatically,

yellow lamp (E) off.

During the freezing process, avoid opening the door of the

freezer.

In order to freeze and then thaw foods optimally, it is rec-

ommended that you divide food into small portions so that

they freeze quickly and uniformly. The packages should be

clearly marked with the content and the date they were

frozen.

Do not open the freezer door in the event of a power failure

or malfunction. This precaution will slow the rise in tem-

perature within the compartment. If the door is not opened,

frozen and fast-frozen foods will remain in their current state

for approximately 9-14 hours.

Do not place full bottles in the freezer: they could easily

burst because all liquids increase in volume when they freeze.

WARNING: to avoid blocking the air circulation inside

the refrigerator, it is advisable not to obstruct the

ventilation holes with food or containers.

Ice trays

This new concept of ice trays is an exclusive Merloni patent.

The fact that they are situated on the inner door of the

freezer compartment ensures greater ergonomics and

cleanliness: the ice no longer comes into contact with the

food placed inside the freezer compartment; furthermore,

the dripping of the water during filling is avoided (a lid to

cover up the hole after filling with water is also provided).

Instructions for use (Fig. 2)

Fill up the tray with water via the special hole up to the level

indicated (MAX WATER LEVEL), taking care not to exceed

it: inserting more water than is necessary will lead to the

formation of ice which could obstruct the exit of the ice

cubes.

If you have used an excessive amount of water, you will

have to wait until the ice has melted, empty out the tray

and re-fill it with water.

Once you have filled the ice tray up with water through the

hole indicated, turn it by 90 °. Thanks to the connected

compartments, the water fills up the special shapes, after

which you can cover the hole up with the special cap and

place the ice tray in the inner door of the freezer

compartment.

Once the ice has formed, all you need to do is to knock the

tray against a hard surface so that the ice cubes come away

from their housing and come out of the same hole used to

fill the tray with water. To make it easier for the ice cubes to

come out, wet the outside of the tray.

WARNING: every time you fill up the ice tray with water ,

make sure that the same is completely empty and that there

are no traces of ice left inside it.

The minimum time required for ice to form well is

approximately 8 hours.

Fig. 2