Indesit CA55SUK Informazioni sul servizio - Pagina 12

Sfoglia online o scarica il pdf Informazioni sul servizio per Frigorifero Indesit CA55SUK. Indesit CA55SUK 13. Freestanding fridge freezer

Indesit

Company

DOOR SEAL REPLACEMENT

Various types of door seal are used for production and as replacements. See Figs. A, B and C showing

seal profiles. Note also the liner profiles A5, A6 and B5, B6 below.

Door seals as Fig. A, are retained by the liner which has 2 screws securing each corner.

Door seals as illustrated in Fig. B are not available as a spare part, but the seal as shown in Fig. C is

supplied as the replacement.

Removing the old Door Seal - See Figs. D to L. below

Remove the freezer door or fridge door and place on a flat protected surface.

Cut the seal across each corner (including the rigid tongue section retained by the liner).

Each section can then be withdrawn from the liner using snipe nosed pliers and pulling.

Where the seal is particularly tight in the liner slot, it might be helpful to ease the edge of the liner away

from the door panel using a wide bladed screwdriver or chisel knife Part Number C00222502

(5500012). Similar practice should be adopted when fitting the replacement seal.

Once the seal is removed and the liner seal pocket is empty, it can be helpful to insert the chisel knife

between the liner / door panel and slide it around the door to clear any debris.

Fitting the Replacement Seal

Insert the replacement door seal rigid tongue between the liner and door panel and push into position,

Fig. L1. It may be necessary to insert a chisel knife C00222502 (5500012) between the liner and door

panel to get the seal started.

Service Manual UK

12 of 13

English